Electrical switchboard equipment E'LKOM GRSCH, VRU, AVR, KTP, CSR, etc.

GRSCH
The GRSCH shield is the main switchboard, which is designed for receiving and distributing electricity in three—phase networks with a voltage of 380/220 volts with a frequency of 50 hertz, as well as protecting outgoing lines from short circuits and overloads. GRSS are used in the power supply of industrial, commercial and civil facilities.

I'M LYING
VRU is an introductory switchgear designed for receiving, accounting and distributing electrical energy with a voltage of 380/220 V AC with a frequency of 50 Hz with a dead-earth neutral in electrical installations of residential and public buildings, industrial premises, as well as for protecting distribution and group circuits departing from VRU during overloads and short circuits.

AVR
The AVR - automatic reserve input shield automatically enters the backup power supply of the installation when the power is turned off at the main input, or when the voltage of any phase deviates from the set value. When power is restored to the main input, an automatic transition from the backup to the main input is possible. Also, the transition from one input to a backup is possible in manual mode.

SCHR and SCHO
Switchboards and switchboards for distribution and lighting are designed for reception and distribution, as well as for protection against overload currents and short-circuit currents of group and single lines.

KTP
KTP - complete transformer substations. They are used to convert the rated voltage of 6 kV and 10 kV to a voltage of 0.4 kV and 0.69 kV, as well as for electricity distribution. They consist of transformers, switchgears, control devices and other auxiliary structures.

CSR
CSR cameras are prefabricated one-way maintenance. The cameras are intended for use in closed switchgears of 6 - 10 kV in networks with an isolated, as well as a neutral grounded by an arc-extinguishing reactor or resistor.

KRU
The complete switchgear (CRU) is assembled from standard unified blocks (cells) of a high degree of readiness. The switchgear contains a set of switching devices, prefabricated and connecting buses, auxiliary devices of the RSIA and means of accounting and measurement.